HunterLab SpectraTrend HT, User Manual

Page: 73 / 109

SpectraTrend HT User’s Guide 3.2
73
Figure 89. Displaying the Average
•
Press the RIGHT ARROW to view the standard deviation.
Figure 90. Displaying the Standard Deviation of the Readings
Note that the meanings of the keypad buttons have now changed slightly, as
shown on the keypad map at the bottom of the screen.
•
Once the standard deviation is displayed, you may press MAIN MENU ( RIGHT
ARROW ) to return to the MAIN MENU .
Run Mode Operation
Complete the following steps to take and average multiple readings using the SpectraTrend HT:
Note: The Average in the product setup is not used during Run Mode. The RUN
will use the last selected Product Setup in the product setup.
•
Before starting a RUN , select the PRODUCT SETUP to use if it is different from the
last time that Run was selected. To change the PRODUCT SETUP , navigate to the
PRODUCT SETUP and then select GO .