HunterLab SpectraTrend HT, User Manual

Page: 51 / 109

SpectraTrend HT User’s Guide 3.2
51
Figure 54. Belt Distance
RUN CONFIGURATION: MIN HEIGHT
The MIN HEIGHT distance is defined as a distance measured from the Belt Distance in
the height units selected such that any product or background located beyond the MIN
HEIGHT distance will not be included in measurements. However, since the
SpectraTrend HT measures height by detecting the angle of the light reflected to the
sensor, height is not measured absolutely, and all heights are relative. Instead, perform
the
MIN HEIGHT determination procedure using the DISTANCE SENSOR in the
DIAGNOSTIC MENU and enter the value obtained as this parameter in the setup. The
default value is 0 inches (0 mm). The MIN HEIGHT distance can be set to half of the
height of the product. Adjust the value by using the RIGHT ARROW . The values are
changed in 5 unit steps up to 100. Once the desired value is reached press the DOWN
ARROW to move to the next parameter. .
Figure 55. Minimum Height from Belt