HunterDouglas Silhouette Duolite Window Shadings PowerView Motorization, Installation Operation Care

Page: 14 / 36

INSTALLATION
12
18V DC Power Supply
Connect the Power Supply
■ ■
Plug the power cable from the shading
into the extension cable.
■ ■
Plug the other end of the extension
cable into the 18V DC power supply.
■ ■
Plug the 18V DC power supply into a
standard wall outlet. The power supply
may be oriented with the cable at the
top or bottom.
■ ■
Secure the extension cable using wire
retainers (not supplied). If hiding the
cable behind the shading, make sure
it does not impede the operation of the
shading.
■ ■
Space the wire retainers approximately
15" apart along the extension cable, as
shown at far right.
WARNING:
Keep cords and
small parts out of the reach of
children. They can wrap cords
around their necks and
STRANGLE .
They can also
put small parts in their mouths
and
CHOKE .
WARNING: Electric shock and/or a fire hazard may occur if the 18V DC power
supply and cables are not properly installed.
SoftTouch
™
Only — Unpack the Wand and Attach to Activation Arm
■ ■
Attach the top of the wand (magnet side) to the
activation arm.
Power Cable
from Shading
Extension
Cable
18V DC
Power
Supply
15"
Maximum
Wire Retainers
Magnet
Activation
Arm