INSTALLATION
7
Additional Clearance with Spacer Blocks
NOTE:
A minimum of
3
/
4
" additional clearance is required for PowerView
®
and SoftTouch
™
shadings with a battery wand.
■
■
If using
1
/
4
" or
1
/
2
" spacer blocks, attach the spacer
block(s) and installation bracket to a flat vertical
mounting surface with #6 screws long enough for
a secure installation.
IMPORTANT:
The solid side of the spacer blocks
must face toward the mounting surface.
Additional Clearance with Extension Brackets
■
■
If using extension brackets, attach each extension bracket
to the mounting surface using the screws provided.
■
■
Attach an installation bracket to the underside of each
extension bracket using the provided screws and speed
nuts.
NOTE:
The maximum amount of added clearance using
extension brackets is 3".
UltraGlide
®
Shading: Proceed to “STEP 3: Install the Shading” on page 9.
PowerView and SoftTouch Shadings: Proceed to “STEP 2: PowerView and SoftTouch Only —
Connect the Power Cable” on page 8.
Spacer
Blocks
Longer
Screws
1
1
/
2
" Maximum
Added Clearance
Extension
Bracket
Speed Nuts
Screws
Summary of Contents for Silhouette Duolite Window Shadings PowerView Motorization
Page 34: ...Notes...
Page 35: ......
