HunterDouglas Silhouette Duolite Window Shadings PowerView Motorization, Installation Operation Care

Page: 30 / 36

CARE
28
Removing the Shading
■ ■
Fully raise the shading.
■ ■
Disconnect the power source from the power cable at the
back of the shading.
■ ■
Move each lever of the installation brackets to the left to
release the shading.
CAUTION:
A flat blade screwdriver can be used to move
the lever. Be very careful not to tear or damage the fabric.
■ ➤
If the lever is inaccessible
or inoperable, lower the shading
until you can see the underside of
the bracket. Carefully reach a small
flat blade screwdriver behind the
shading to the tab on the bottom
of the bracket between the screw
holes.
■ ➤
Push the tab away from the
shading and pull the headrail to
release it from the bracket.
■ ■
Carefully pull the headrail to completely
remove the shading from the brackets.
Cleaning Procedures
Silhouette
®
Window Shadings are made of 100% polyester, which means they are inherently
durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly
where the vanes meet the facings.
Cleaning the Palette
®
Fabric-Covered Headrail
■ ■
Spot-clean the headrail using a sponge or delicate cloth, cool distilled water and a mild soap
solution; handle with care as you would any fine fabric.
Cleaning the Front Silhouette Shading
Dusting
■ ■
Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■ ■
Use a low suction, hand-held vacuum for more thorough dust removal.
Move the lever to the left
to release the shading.
Top View
Tab
Installation Bracket
Underside of
Bracket
End Cap