INSTALLATION
6
■
Attach the installation brackets using the screws provided.
IMPORTANT:
Additional clearance is required for
PowerView
®
shades with the battery wand. Use a
minimum of one
1
/
2
" and one
1
/
4
" spacer blocks per
installation bracket to provide the clearance required
for the battery wand. See the instructions below.
■
If the shade will be powered by a battery wand:
Attach the installation brackets with
both the
1
/
4
" and
1
/
2
" spacer blocks. Use 2" #6 hex head screws (not provided).
➤
The solid side of the spacer blocks faces the
mounting surface.
➤
If using additional spacer blocks for more
clearance, attach the installation brackets and
spacer blocks with #6 screws long enough for a
secure installation.
IMPORTANT:
Do not add more than 1
1
/
2
" of
clearance using spacer blocks.
IMPORTANT:
The tops of the installation brackets
must be level with the front edges aligned.
Proceed to “STEP 2 — Remove the Shipping Clips” on page 7.
Spacer
Blocks
Longer
Screws
3"
Spacer
Blocks
1
/
2
"
1
/
4
"
