CARE
19
Removing the Shade
■
Fully raise both the front shade and back panel.
■
While holding the headrail, place the
blade of a small screwdriver on the
installation bracket’s locking tab.
➤
Insert the screwdriver between the
arrows on the bottom tabs.
CAUTION:
Be very careful not to tear
or damage the fabric.
■
Push up to release the shade.
IMPORTANT:
On longer shades, you
might need to lower the front shade
slightly to access the locking tab.
Cleaning Procedures
Hunter Douglas Vignette
®
Modern Roman Shades are made with anti-static, dust-resistant
fabrics that repel dirt and dust. For most fabrics, the following cleaning options are available.
Dusting
■
Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■
Use a hand-held vacuum with low suction for more thorough dust removal.
Compressed Air/Hair Dryer (Cool Setting)
■
Blow dirt and debris from within the fabric folds using clean, compressed air.
Spot-Cleaning
■
Spot clean using a sponge or delicate cloth, warm distilled water, and a mild soap solution.
Handle with care as you would any fine fabric.
■
Dab the spot with the dampened sponge or cloth until it is removed. Rubbing alcohol or
non-oil-based baby wipes may be used on more stubborn stains. Do not rub the fabric.
■
Allow the shade to dry in the completely lowered position.
Cleaning the Back Panel
■
The back panel fabric can be cleaned by dusting, low suction hand-held vacuuming,
compressed air, hair dryer on the cool setting, or the dry method of injection/extraction.
Push
Up
Locking
Tab
Arrows
