Humminbird 500 SERIES 580 Operation Manual Download

Page: 91 / 134

Units - Speed

Units - Speed

selects the units of measure for speed-

related readouts, and will appear in the menu if a Temp/Speed Accessory is
connected and the paddlewheel has moved at least once, or if the GPS Receiver
is connected.

To change the Units - Speed setting:

1. Highlight Units - Speed on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units

- Speed setting. (kph

[International Models only]

, mph, kts, Default =

kph for International models and mph for Domestic models)

User Mode

User Mode

sets the menu system to either Normal or

Advanced. When set to Normal (default setting,) only the basic menu options
are shown. When set to Advanced, additional menu choices are available.

To change the User Mode setting:

1. Highlight User Mode on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User

Mode setting. (Normal, Advanced, Default = Normal)

Language

(International only)

Language

selects the display language for menus.

International Models only

To change the Language setting:

1. Highlight Language on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the

Language setting. (Default = English)

Summary of Contents for 500 SERIES 580







































































































































Search results

Summary of Contents for 500 SERIES 580

Reviews:

Related manuals for 500 SERIES 580

Brands by name

Popular brands

Humminbird 500 SERIES 580, Operation Manual

Search results

Summary of Contents for 500 SERIES 580

Reviews:

Related manuals for 500 SERIES 580

Brands by name

Popular brands