manualshive.com logo in svg

Humminbird 500 SERIES 580, Operation Manual

Share
Download
Humminbird 500 SERIES 580 Operation Manual Download Page 95

88

Temp Offset 

(Advanced) 

Temp Offset 

will adjust the temperature readout by the amount entered. This

menu choice is available only when in Advanced User Mode (see 

Setup Menu

Tab: User Mode

.)

To change the Temp Offset setting:

1.  Make sure you are in Advanced User Mode, then highlight Temp Offset

on the Setup menu.

2.  Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp

Offset setting. (-10.0 to +10.0 degrees, Default = 0)

Speed Calibration 

(Advanced, with Temp/Speed only) 

Speed Calibration

will adjust the speed readout by the percentage entered,

and will appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, when the unit is in Advanced User Mode
(see 

Setup Menu Tab: User Mode

.)

To change the Speed Calibration setting:

1.  Make sure you are in Advanced User Mode, then highlight Speed

Calibration on the Setup menu.

2.  Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed

Calibration setting. (-20% to +20%, Default = 0%)

Summary of Contents for 500 SERIES 580







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands