manualshive.com logo in svg

Humminbird 500 SERIES 580, Operation Manual

Share
Download
Humminbird 500 SERIES 580 Operation Manual Download Page 92

85

Triplog Reset   

Triplog Reset

resets the Triplog to zero, and will

appear in the menu if a Temp/Speed Accessory is

connected and the paddlewheel has moved at least once, or if the GPS Receiver
is connected. The Triplog provides the following information: timer for elapsed
time, distance traveled since last reset, and average speed. 

NOTE:  

See 

Setup Menu Tab: Select Readouts (Advanced)

to find out how to display

Triplog information on the screen. 

To Reset Triplog:

1. Highlight Reset Triplog on the Setup menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.

3. The Confirm dialog box will appear. To reset the Triplog, press the

RIGHT Cursor key once more. To cancel Reset Triplog, press the LEFT
Cursor key. 

Restore Defaults 

Restore Defaults 

resets ALL menu settings to their

factory defaults. Use this menu choice with caution!

To Restore Defaults:

1. Highlight Restore Defaults on the Setup menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.

3. The Confirm dialog box will appear. To reset the defaults,  press the

RIGHT Cursor key once more. To cancel Restore Defaults, press the
LEFT Cursor key. 

Summary of Contents for 500 SERIES 580







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands