Humminbird 500 SERIES 580 Operation Manual Download

Page: 84 / 134

Depth Alarm

Depth Alarm

sounds when the depth becomes

equal to or less than the menu setting.

To change the Depth Alarm setting:

1. Highlight Depth Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth

Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters

[International

Models only]

, Default = OFF)

Fish ID Alarm

Fish ID Alarm

sounds when the Fishfinder

detects fish that correspond to the alarm setting. Fish ID Alarm will only
sound if Fish ID+

is on.

To change the Fish ID Alarm setting:

1. Highlight Fish ID Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish

ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)

Large

Large/Medium

All

Off

For example, if you've set the Fish ID Alarm to sound for Large fish only,

the Fish ID alarm will sound when a large-sized fish is detected.

Summary of Contents for 500 SERIES 580







































































































































Search results

Summary of Contents for 500 SERIES 580

Reviews:

Related manuals for 500 SERIES 580

Brands by name

Popular brands

Humminbird 500 SERIES 580, Operation Manual

Search results

Summary of Contents for 500 SERIES 580

Reviews:

Related manuals for 500 SERIES 580

Brands by name

Popular brands