Humminbird 500 SERIES 580 Operation Manual Download

Page: 75 / 134

Chart Orientation

Chart Orientation

allows you to select whether

the Chart and Combo Views should be drawn North-Up or Course-Up.

To change the Chart Orientation setting:

1. Highlight Chart Orientation on the Navigation main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart

Orientation setting. (North-Up, Course-Up, Default = North-Up)

NOTE:

The Chart Orientation setting does not apply to the Bird's Eye View.

Chart Detail Level

Chart Detail Level

allows you to select how much

chart detail you want displayed on the Navigation Views.

Basic

shows land

areas, ports, obstructions and restricted areas.

Navigation

shows navaids,

landmarks, ferryways and navigation routes in addition to the Basic
information.

Underwater

shows depth contours, fishing areas, underwater

wrecks, tides and currents in addition to the Basic and Navigation information.

All

shows roads, buildings, railways, and other notations in addition to the

Basic, Navigation and Underwater information.

To change the Chart Detail Level setting:

1. Highlight Chart Detail Level on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart

Detail Level setting. (Basic, Navigation, Underwater, All, Default = All)

NOTE:

Some chart details are only available with optional-purchase MMC/SD cards.

Summary of Contents for 500 SERIES 580







































































































































Search results

Summary of Contents for 500 SERIES 580

Reviews:

Related manuals for 500 SERIES 580

Brands by name

Popular brands

Humminbird 500 SERIES 580, Operation Manual

Search results

Summary of Contents for 500 SERIES 580

Reviews:

Related manuals for 500 SERIES 580

Brands by name

Popular brands