Humminbird 500 SERIES 580 Operation Manual Download Page 57

Page: 57 / 134

Cursor to Waypoint

(Chart or Combo view only)

Cursor to Waypoint

allows you to quickly move the cursor to any saved

waypoint, so that you can locate it or edit it.

NOTE:

This X-Press

menu item appears only if you have saved waypoints.

To move cursor to a saved waypoint:

1. Highlight Cursor to Waypoint on the Navigation X-Press™ menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to

Waypoint.

3. Use the UP or DOWN 4-WAY Cursor Control key to highlight the

waypoint you wish to move the cursor to, then use the RIGHT 4-WAY
Cusor Control key to select the destination waypoint.

Save Current Track

Save Current Track

allows you to save the current

track being displayed. After the current track is saved, a new current track is
started.

To Save Current Track:

1. Highlight Save Current Track on the Navigation X-Press™ menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current

track.

3. The Confirm dialog box will appear. To save the current track, press the

RIGHT Cursor key once more. To cancel saving the current track, press
the LEFT Cursor key.

Summary of Contents for 500 SERIES 580







































































































































Search results

Summary of Contents for 500 SERIES 580

Reviews:

Brands by name

Popular brands

Humminbird 500 SERIES 580, Operation Manual

Search results

Summary of Contents for 500 SERIES 580

Reviews:

Brands by name

Popular brands