OI (Part 2): Steely, HA, Startrailer
Version 2019/01
17
6.3.1 Motorcycle stand
Functional explanation
•
With the proper tie-downs, a motorcycle stand can
be used for safely transporting a motorcycle.
•
The motorcycle stand serves as a limit stop and is
mounted in the centre of the cargo bed.
•
The motorcycle stand is adjustable and prevents the
motorcycle from falling off the trailer.
•
The motorcycle stand is available for the type: HA
132513 available with loading ramps or tailgate ramp.
If retrofitted, the motorcycle stand must be
positioned at the centre of the cargo bed and
vertically against the front drop side.
Read and observe the assembly instructions.
Operating the motorcycle stand
1
2
3
4
5
6
Adjusting the motorcycle stand
1. Front stop, foldable
2. Wing nut / spring washer / retaining screw
3. Base rail
4. Plug bolt with cotter pin
5. Loading ramp
6. Adjustment holes
Position the loading ramp
The loading ramp must be adjusted to the size of
the motorcycle wheel. After positioning the
motorcycle, the loading ramp should fit snugly
around the wheel.
►
►
Pull the cotter pin out of the
plug bolt.
►
►
Pull out the plug bolt.
►
►
Position the loading ramp in accordance with
the wheel size of your motorcycle and in line with the
base rail.
►
►
Insert the plug bolt through the axle and align it
with the adjustment holes.
►
►
Insert the cotter pin into the drill-hole of the
plug bolt.
►
►
Swivel the loading ramp around.
- The motorcycle can now be positioned.
1
2
Folding down the front stop
►
►
Loosen the screws (wing nuts) on both sides.
►
►
Position the loading ramp as far forward as possible.
►
►
Fold down the stop.
►
►
Insert the retaining screws from the inside.
►
►
Firmly tighten the wing nuts with their spring washers.
