Humbaur 1000 Series Page 2 Operating Instructions Manual Download | Manualshive

Page: 2 / 36

background image

2

Version 2019/01

OI (Part 2): Steely, HA, Startrailer

Notes on use/Target group

PART 2 - Original - "Steely, HA, Startrailer" Operating Instruction Manual

This "Steely, HA, Startrailer" operating instruction manual (Part 2) is intended for you as a user of a ready-to-use trailer.
It describes detailed steps for handling the Steely, HA, Startrailer trailers.
It contains all of the relevant details on safe operation, care/cleaning, maintenance/servicing, troubleshooting and decom-
missioning/disposing of the trailer.
This specific operating instruction manual (Part 2) for your trailer is on the enclosed CD. You can also download it from

www.humbaur.com under the section: Download - Operating Instructions

.

PART 1 - "Trailers up to 3.5 to" (General Points)

For all other general information on car trailers, see the operating instruction manual, "Car Trailers" (General Points - Part 1).

•

PART 1 and PART 2 together form the complete documentation for your trailer, which you as the user should have at
your disposal.

Read this operating instruction manual carefully and completely before using your trailer for the first time and
observe all of the instructions, safety information and warnings. Comply with the steps for handling the trailer.

•

Non-observance of any of the documentation can cause injuries to you and to other persons or can cause material
damage.

•

Non-observance may invalidate your guarantee entitlement.

•

Keep this operating instruction manual carefully for the entire service life of your trailer.

•

It forms part of the product and also serves as a CHECK LIST for regular inspections of your trailer.

•

We advise you to store the operating instruction manual in the driver's cab and to keep it at hand in case you need to
consult it.

•

It should be passed on to the new user/owner if you rent out or sell your trailer.

In addition, as a road user, you are obliged to observe all national regulations for driving a vehicle and trailer and to
comply with your obligations as the owner of a commercial vehicle.

•

This includes regularly carrying out maintenance and care tasks and periodically subjecting your trailer to an overall
technical inspection.

•

You must make sure that you are aware of any special stipulations that are specific to your country.

Name and address of dealer:

Name:

Address:

Telephone:

►

►



►

►

Please enter the name of your dealer.

Name and address of manufacturer:

Humbaur GmbH
Mercedesring 1
86368 Gersthofen
Germany

Tel. +49 821 24929-0
Fax +49 821 249-100

[email protected]
www.humbaur.com

«
1
2
3
4
...
»

Summary of Contents for 1000 Series





































Reviews:

No comments

Related manuals for 1000 Series

2005 Ranger 4x4

Brand: Polaris Pages: 121

Brand: Nakayama Pages: 14

Brand: Baltmotors Pages: 58

Brand: Cub Cadet Pages: 28

Brand: Club Car Pages: 60

Brand: BOMBARDIER Pages: 328

Brand: Baja motorsports Pages: 44

Brand: jcb Pages: 227

Brand: YTL Pages: 23

Brand: KAYO MOTO Pages: 186

Brand: KEEWAY Pages: 97

Brand: Zocon Pages: 12

Brand: Kellfri Pages: 12

Brand: Yamaha Pages: 59

Brand: Yamaha Pages: 405

Brand: Tao Motor Pages: 79

Workman 133-0959

Brand: Toro Pages: 8

Workman MDE 07299

Brand: Toro Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands