Humbaur 1000 Series Operating Instructions Manual Download Page 22

Page: 22 / 36

Version 2019/01

OI (Part 2): Steely, HA, Startrailer

Open the rear drop side

►

Unlock the locks on both sides.

►

Fold down the rear drop side.

►

Hook the snap hook of the support rope into the eyelet.

Close the rear drop side

►

Fold up the rear drop side.

- Ensure that the support rope is not jammed between
the stanchion and the drop side.

►

Lock the locks on both sides.

6.4.1.1 Tilting the cargo bed down / back

Unlock the eccentric tension locks

Eccentric tension locks secured

1.  Hook
2.  Eyelet
3.  Cotter pin
4.  Handle
5.  Rubber buffer

Before tilting the cargo bed, the rear drop side
must be secured with the support rope.







Open / close the eccentric tension locks

Opening

►



Pull the cotter pin out of both eccentric tension

locks.

►

Hold the cargo bed down with one hand to stop it from
tilting upwards, if necessary with the help of an assistant.

►



Fold up the handles.

►



Swivel the eyelets out of the hook.

Closing

►



Place the eyelets onto the hooks.

►



Push down the handles.

►



Insert the cotter pins into both eccentric

tension locks.

The eccentric tension locks are secured against automatic opening.

Tilting down the cargo bed (empty)





Cargo bed tilted down / rear drop side folded down

►

Slowly tilt the cargo bed downwards in a controlled
manner.

►

Unhook the snap hook from the eyelet.

- The rear drop side must be completely rested on the

floor / base.

Summary of Contents for 1000 Series





































Search results

Summary of Contents for 1000 Series

Reviews:

Brands by name

Popular brands

Humbaur 1000 Series, Operating Instructions Manual

Search results

Summary of Contents for 1000 Series

Reviews:

Brands by name

Popular brands