manualshive.com logo in svg

Humbaur 1000 Series, Operating Instructions Manual

Share
Download
Humbaur 1000 Series Operating Instructions Manual Download Page 18

18  

Version 2019/01 

 

OI (Part 2): Steely, HA, Startrailer

6.3.2  Wood/aluminium cover with/without rail

Functional explanation

• 

The wood/aluminium cover is used for the protected 
transport of sensitive goods.

• 

The wood/aluminium cover can be locked with a key 
and thus protects your goods against theft.

• 

The loading volume is increased by the internal height 
of the wood/aluminium cover, i.e. by 185 mm.

• 

The wood/aluminium cover is supported by a gas 
strut for easier opening. The gas strut keeps the 
cover in an open position.

• 

The wood/aluminium cover is available for the 
following type: HA & Startrailer available with rail 
and bicycle stand. It has been specifically adapted to 
the trailer size.

 

 

WARNING

 

Driving with cover open / unlocked!

The cover can spring open while driving and be 
torn off / deformed. The goods may be flung off. 
The trailer may start to skid and be uncoupled 
from the towing vehicle. 

►

►

Do not drive with the cover open / half-open.

►

►

Before driving off, check that the cover is  

 

properly closed and locked.

Presence in the trailer with the cover closed!

Risk of suffocation due to lack of oxygen in loading area. 

►

►

 Avoid being in the closed trailer. 

►

►

Do not transport any live animals.

►

►

Before closing the cover, check that there are  

 

no persons / animals in the trailer.

 

 

CAUTION

 

Operating the cover!

You may catch your hands/body in the cover or 
bump your head while folding the cover down. 
 

►

►

Operate the cover carefully.  

 

- Do not allow the cover to fall shut on its own.

►

►

 Use the handle to operate the cover - do not reach over 
the closing edge or into the transmission linkage.

►

►

 Use the pull strap to close the cover and hold it firmly by 
the handle.

Risk areas

 

 

CAUTION

 

Worn gas strut!

Where a gas strut is leaking / worn, the cover may 
fold down on its own and hit / bump you. 

►

►

When operating the cover, ensure that it  

 

does not fall down by itself.

►

►

Have any faulty / worn gas struts replaced  

 

immediately by a specialised workshop.

NOTICE

Overload on cover / rail!

The cover / rail may become deformed or break. 

►

►

 Limit the weight on the cover / rail to a maximum of 60 kg.

►

►

Do not climb onto the cover / rail.

kg

max. 60  

Opening the foldable front drop side!

The transmission linkage for the gas strut is attached to the front 
drop side. Opening the front drop side results in deformation of 
the cover. It may fall down. 

►

►

Never open the front drop side.

►

►

Do not remove the locking screws.

Summary of Contents for 1000 Series





































Reviews:

No comments

Brands by name

Popular brands

Load more brands