Humbaur 1000 Series Page 30 Operating Instructions Manual Download

Page: 30 / 36

Version 2019/01

OI (Part 2): Steely, HA, Startrailer

6.4.5 Wooden ramp wall

Overloading the ramp wall!

Driving over the ramp wall may cause a

loss of stability and may break it.

The ramp wall may fall off while driving, posing an accident risk!

Someone may be injured - risk of crushing!

►

Do not load the ramp wall with more than 300 kg for

two reinforcement profiles and no more than 500 kg

for three reinforcement profiles.

►

Before loading, ensure that the maximum

carrying capacity is not exceeded by

the load / vehicle to be loaded.

►

Do not drive over the ramp wall with a pallet loader
or a mobile lifting platform - their small wheels exert a
high point load.

►

Do not drive with a deformed ramp wall - replace it
immediately.

Wooden ramp wall, closed (driving position)

1.  Reinforcement profiles
2.  Ramp wall (with tread plate), divided into two sections
3.  Gas strut
4.  Rotary lever lock

The trailer must be supported with prop stands
and/or coupled to the towing vehicle before
driving over the wooden ramp wall.

WARNING

Opening / folding down

620.00402

Wooden ramp wall - unlock locks

1.  Eyelet
2.  Safety spring
3.  Rotary lever

►

Push in the safety spring.

►

Open the rotary lever.

The rotary lever hook is detached from the eyelet.

►

Unlock the rotary lever lock on the other

side of the ramp wall.

►

Carefully fold down the lower section of the ramp wall
against the force of the gas struts - stand to one side next
to the ramp wall while doing so.

Folding open the upper section

1. Lower section of ramp wall
2. Upper section of ramp wall

►

Carefully unfold the upper section of the

ramp wall.

- Make sure that your hands / feet are not under

the upper section of the ramp wall.

Driving

►

Support the trailer using the prop stands.

►

Before driving onto the wooden ramp wall,

check that you are not exceeding the maximum

permissible load.

►

Slowly and carefully drive over the wooden ramp wall.

Summary of Contents for 1000 Series





































Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands

Humbaur 1000 Series, Operating Instructions Manual

Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands