Humbaur 1000 Series Operating Instructions Manual Download

Page: 26 / 36

Version 2019/01

OI (Part 2): Steely, HA, Startrailer

6.4.3 Grid ramp wall

Overloading the ramp wall!

Driving over the ramp wall may cause a loss of stability and may

break it.

The ramp wall may fall off while driving, posing an accident risk!

Someone may be injured - risk of crushing!

►

Do not place more than 500 kg load onto the ramp wall.

►

Before loading, ensure that the maximum carrying capac-
ity is not exceeded by the load / vehicle to be loaded.

►

Do not drive over the ramp wall with a pallet loader

or a mobile lifting platform - their small wheels

exert a high point load.

►

Do not drive with a deformed ramp wall -

replace it immediately.

Impact / crushing risk when unlocking

the ramp wall!

When the ramp wall is unlocked, it may fall
down in an uncontrolled manner.

A person could be crushed / hit.

►

Keep firm hold of the ramp wall when unlocking it.

►

Fold the ramp wall open in a slow, controlled manner.

►

It takes two people to operate the ramp wall.

Grid ramp wall closed (driving position)

1.  Ramp wall divided into two parts
2.  Lock
3.  Prop stand

The trailer must be supported with prop stands
and/or coupled to the towing vehicle before
driving over the grid ramp wall.

WARNING

CAUTION

Opening / folding down

Unlocking the grid ramp-wall locks

1.  Upper section
2.  Lower section
3.  Handles
4.  Lock
5.  Hook
6.  Eyelet
7.  Snap-lock
8.  Quick-release lever

►

Unlock the lock on the drop-side side

without handles on the ramp wall.

- Push the snap lock away.

- Pull the quick-release lever open and take the eyelet

off the hook.

Push the quick-release lever shut.

►

Unlock the lock on the drop-side side with handles on the
ramp wall.

►

Hold the unlocked ramp wall firmly at the handles

with both hands.

Grid ramp wall - fold open

►

Carefully unfold the ramp wall.

- Ensure that the upper and lower section of the

ramp wall form a straight / even driving surface.

Summary of Contents for 1000 Series





































Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands

Humbaur 1000 Series, Operating Instructions Manual

Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands