manualshive.com logo in svg

Hughes HX90, User Manual

Share
Download
Hughes HX90 User Manual Download Page 9

 • Contact information

 

1039457-0001  Revision A

9

Contact information

If you experience a problem with your HX90 satellite router, first try the solutions 
offered in Chapter 4 – 

Troubleshooting

 on page 41. If you need assistance, use the 

contact information listed here.

If you need operational, warranty, or repair support, who you should contact 
depends on where you purchased your satellite router. You may be supported by 
Hughes Customer Care or another service provider. Please contact your customer 
service representative in accordance with your service agreement.

For satellite routers purchased from a retail channel or Hughes 
sales agent in the United States or Canada

If you purchased this product through a retail channel or Hughes sales agent, you 
have several support options. Please try these options 

in the order listed 

until you 

find the help you need.

Begin at the HughesNet Customer Care page:

1. Open a web browser on a computer connected to the satellite router.
2. Enter the web address 

www.myhughesnet.com

.

3. Click the 

HughesNet Customer Care 

link.

The HughesNet Customer Care page opens. Options 1, 2, and 3 below are available 
on this page:

1. Search our Knowledge Base.

a. In the Self help section, click 

Knowledge Base Search

. 

b. Follow the on-screen instructions to find the information you need.

2. Email a Customer Care representative.

a. In the Contact Hughes section, click 

Email

.

b. Complete the email form.
c. Click

 Email Us!

 

3. Chat with a Customer Care representative.

a. In the Contact Hughes section, click 

Chat.

b. Complete the chat form.
c. Click 

Chat with Us! 

4. Call a Customer Care representative.

If none of these options helps you, call Hughes Customer Care at 

 

1 (866) 347-3292.

For satellite routers purchased from a value-added reseller (VAR) 
in the United States or Canada

If you purchased this product from one of our VARs, do not contact Hughes. Contact 
your VAR for technical support according to the procedure supplied by them. They 
are trained to help you with any technical problem.

Summary of Contents for HX90

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands