manualshive.com logo in svg

Huawei V300R001, Parts Replacement

Share
Download
Huawei V300R001 Parts Replacement Download Page 97

NOTE

l

Two different nameplates are included in the product. Select the one that contains identical
information to the nameplate on the removed system subrack.

l

When attaching the product model label and Intel label, attach the product model label first and then
attach the Intel label under the information on the product model label.

Step 7

Optional: 

Pull the information plate of the system subrack. (If you face the front part of the

system subrack, the information plate is located at the lower right of the enclosure, as shown
in 

Figure 5-20

. Gently pull the information plate, but not away from the enclosure.) Attach

the device information label to the information plate. Then, push the information plate back to
the enclosure.

Figure 5-20

 Position of the information plate

NOTE

You can attach the device information labels to both the front and back of the information plate. The
label content and positions must be the same as those on the replaced system subrack. If a label has been
attached to one side of the information plate, you only need to attach the device information label with a
QR code to the other side of the information plate. Attaching the device information plate helps
engineers easily identify and maintain devices.

Step 8

Install the system subrack into the cabinet, as shown in 

Figure 5-21

.

1.

Slide the system subrack into the cabinet along guide rails.

2.

Use M6 screws to fix the system subrack in the cabinet.

3.

Ensure that the system subrack is horizontally installed and tightly screwed.

OceanStor Dorado V3 Series
Parts Replacement

5 Replacing FRUs

Issue 05 (2019-01-30)

Copyright © Huawei Technologies Co., Ltd.

89

Summary of Contents for V300R001





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands