manualshive.com logo in svg

Huawei V300R001, Parts Replacement

Share
Download
Huawei V300R001 Parts Replacement Download Page 113

Impact on the System

l

During the replacement of a controller, all services on the to-be-replaced controller are
switched to the peer-end controller, with a 5s to 10s storage I/O suspension. The service
switchover duration increases and controller replacement may fail if the service load is
heavy.

l

During the replacement of a controller, system performance and reliability are
compromised. Therefore, replace a controller during off-peak hours.

Prerequisites

l

If the controller that you want to replace is processing services, ensure that its CPU
usage does not exceed 40% before replacing it.

NOTE

If you use the FRU tool to replace a controller, the tool will check this item automatically. To manually
check this item, run the 

show controller general

 command. For details, see the 

Command Reference

specific to your product.

l

The spare part is ready.

l

The controller that you want to replace has been located.

NOTE

You can locate a component in either of the following ways:

l

Locating a component based on alarms in DeviceManager: On the 

Alarms and Events

 page of

DeviceManager, view the help information and locate the component to be replaced.

l

Locating a component based on the status of its alarm indicator: For details about the indicators on
different components, see indicator introduction in the 

Product Description

 specific to your product.

l

The cable connection positions of the controller that you want to replace are labeled on
the cables.

l

After a user manually replaces the public/private key pairs of 

ibc_os_hs

, the public/

private key pairs of all other functional controllers are initialized before controller
replacement.

NOTE

To initialize the public/private key pairs, log in to the serial port of the controller enclosure using user
account 

_super_admin

 (the default password is 

Admin@revive

) and run the 

initibckey

 command.

l

If the storage system of the current version allows SSH port IDs to be configured, the
SSH port ID of each controller in the storage system is the default value 22.

NOTE

Run 

show system server_port server_name=SSH

 to check whether the SSH port ID is 22. If the port

ID is not 22, run 

change system server_port server_name=SSH port_num=22 

to change it to 22.

l

If the controller to be replaced is in minisystem state (After you log in to the CLI of the
controller, 

Storage: minisystem>

 is displayed), run the 

showbootmode

 command to

check whether the boot mode of the storage system is normal.

–

If the command output is 

boot -> boot_osp

, the boot mode is normal. Find the fault

reason and rectify the fault before replacing the controller.

–

If the command output is 

boot -> boot_rescue

, the boot mode is abnormal. Run the

resumebootmode

 command to restore the boot mode to normal before replacing

the controller.

OceanStor Dorado V3 Series
Parts Replacement

5 Replacing FRUs

Issue 05 (2019-01-30)

Copyright © Huawei Technologies Co., Ltd.

105

Summary of Contents for V300R001





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands