Figure 5-9 Three-core cable (excluding the ground cable and neutral wire)
(A) Core wire
(B) Insulation layer
(C) Jacket
Figure 5-10 Four-core cable (including the ground cable but excluding the neutral
wire)
Step 4 Crimp an OT terminal.
Step 5 Land the AC output power cable in the terminal block, and tighten the nuts with a
torque wrench that has an extension rod.
NO TICE
● Ensure that AC terminations provide firm and solid electrical connections.
Failing to do so may cause SUN2000 malfunction and damage to its terminal
block, even starting thermal events. Any SUN2000 damaged due to weak
termination will result in revocation of product warranty.
● When connecting a PE cable, secure the screws using a socket wrench with an
extension wrench longer than 200 mm.
● If the AC output power cables are subject to a pulling force because the
inverter is not installed stably, ensure that the last cable that bears the stress is
the PE cable.
SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
5 Electrical Connections
Issue 06 (2020-10-12)
Copyright © Huawei Technologies Co., Ltd.
43
