Huawei STS-6000K-H1 Installation Manual Download Page 48

Page: 48 / 77

STS-6000K-H1 Smart Transformer Station (Vietnam,
Duc Long Gai Lai)
Installation Guide

7 Connecting Cables

Issue 02 (2020-02-21)



Cable ties should be neatly cut without sharp burs, evenly distributed, bound to a proper
strength, and fastened towards the same direction.



The bundled cables should be close to each other, straight, and neat.



The redundant cables should be coiled neatly for identification.



Cables should not be overly bent to avoid damage the cable cores.



Cables should not be tied where they bend.

7.1 Preparing Cables



Cables should have sufficient current-carrying capacity and should not be overloaded.



Cables with the same functions should have the same specifications and type.

Figure 7-1

Cable connections (configure the components in the dotted box as required)

(A) Side view of the STS LV
cabinet

(B) Front view of the
STS

(D) Solar inverter

(E) AC switch box

(F) UPS

(G) Smart array controller
(SACU)

(H) Support tracking
system

(I) Power-consuming device

(J) Power grid

(K) STS

Summary of Contents for STS-6000K-H1














































































Search results

Summary of Contents for STS-6000K-H1

Reviews:

Related manuals for STS-6000K-H1

Brands by name

Popular brands

Huawei STS-6000K-H1, Installation Manual

Search results

Summary of Contents for STS-6000K-H1

Reviews:

Related manuals for STS-6000K-H1

Brands by name

Popular brands