Huawei STS-6000K-H1 Installation Manual Download | Manualshive

Page: 3 / 77

background image

STS-6000K-H1 Smart Transformer Station (Vietnam,
Duc Long Gai Lai)
Installation Guide

About This Document

Issue 02 (2020-02-21)

Copyright © Huawei Technologies Co., Ltd.

ii

About This Document

Purpose

This document describes how to install the STS-6000K-H1 smart transformer station (STS for
short). Before installing the STS, read through this document, get familiar with the features,
functions, and safety precautions provided in this document.

Figures used in this document are for reference only.

Intended Audience

This document is intended for photovoltaic (PV) plant operators and qualified electricians.

Symbol Conventions

The symbols that may be found in this guide are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal
injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.

«
1
2
3
4
5
...
»

Summary of Contents for STS-6000K-H1














































































Reviews:

No comments

Related manuals for STS-6000K-H1

DigitalFlow XGS868i

Brand: Panametrics Pages: 86

Brand: Ham Pages: 37

TRIPP LITE Series

Brand: Eaton Pages: 16

Brand: Alinco Pages: 48

Brand: SAMCOM Pages: 16

BTL5-S1 M B-DEXA/B K Series

Brand: Balluff Pages: 70

Brand: Phoenix Contact Pages: 24

Brand: HomeFree Systems Pages: 7

Brand: Radio Shack Pages: 44

Brand: Vertex Pages: 66

Brand: CRC Pages: 7

Brand: WAREMA Pages: 6

Brand: AquaScape Pages: 2

Brand: Icom Pages: 40

Brand: Icom Pages: 60

Brand: Icom Pages: 96

Brand: Icom Pages: 17

Brand: Icom Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands