NOTE
host
displayed on the OSM3.0 main interface is a virtual one created for easy management.
You must add a port to a virtual host so that the virtual host can match a physical AS.
l
To match each AS with one virtual host, you must add the information about the physical ports of the
ASs to the virtual hosts.
l
The storage device identifies each AS through the information about the physical port of the AS.
Figure 3-2
shows the initial configuration flow chart of the S5600 configured with FC and iSCSI
host ports.
Figure 3-2
Iinitial configuration flow chart of the S5600 configured with FC and iSCSI host
ports
Log in to
the OSM3.0
Start
Create a
RAID group
Create a
host group
Set the iSCSI
host ports of the
controllers
Create a
LUN
Add a host
Add a
mapping
Add a port
End
Log in to the AS
Set up the
connection from the
AS to the controller
Use a LUN
on an AS
Start the
CHAP
authentication
1
Using CHAP
authentication on
an AS
2
Set the FC
host ports of
the controllers
3 Configuring the Storage System
OceanStor S5600 Storage System
Initial Configuration Guide
3-4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2009-09-30)
