Huawei OceanStor S2600 Command Reference Manual Download Page 16

Page: 16 / 274

Chapter

Description

3 Basic Operation
Commands

This chapter describes how to use the basic operation
commands.

4 System Management
Commands

This chapter describes how to use the system management
commands.

5 Device Management
Commands

This chapter describes how to use the device management
commands.

6 Service Management
Commands

This chapter describes how to use the service configuration
commands.

7 Alarm Management
Commands

This chapter describes how to use the alarm management
commands.

8 User Management
Commands

This chapter describes how to use the user management
commands.

9 Value-Added Service
Management Commands

This chapter describes how to use the value-added service
management commands.

A How to Obtain Help

This chapter describes preparations and ways for obtaining help
from Huawei.

B Glossary

This chapter describes the terms referred to in this document.

C Acronyms and
Abbreviations

This chapter describes the acronyms and abbreviations referred
to in this document.

Conventions

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

DANGER

Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.

WARNING

Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.

CAUTION

Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.

TIP

Indicates a tip that may help you solve a problem or save
time.

About This Document

OceanStor S2600 Storage System

Command Reference

Huawei Proprietary and Confidential

Issue 07 (2010-05-20)

Summary of Contents for OceanStor S2600



















































































































































































































































































Search results

Summary of Contents for OceanStor S2600

Reviews:

Related manuals for OceanStor S2600

Brands by name

Popular brands

Huawei OceanStor S2600, Command Reference Manual

Search results

Summary of Contents for OceanStor S2600

Reviews:

Related manuals for OceanStor S2600

Brands by name

Popular brands