Huawei OceanStor S2600 Command Reference Manual Download Page 68

Page: 68 / 274

Keyword and Value

Description

Default Value

-t type

The port type. The value can
be 1, 2 or 3:

1 stands for FC host ports.

2 stands for iSCSI host
ports.

3 stands for SAS host
ports.

None.

-l

Collects LUN-based
performance statistics.

None.

-i LUN/port ID

The LUN ID or port ID.

The LUN ID. The value
ranges from 0 to 511.

The port ID.

–

For S2600F and
S2600i, the value
ranges from 0 to 7 (port
0~3 belong to controller
A and port 4~7 belong
to controller B.)

For S2600S, the value
ranges from 0 to 3 (port 0
and 1 belong to controller
A, port 2 and 3 belong to
controller B.)

For S2600C, the value can
be 0, 1, 4 and 5 (port 0 and
1 belong to controller A,
port 4 and 5 belong to
controller B.)

None.

Modes

Normal mode.

Level

Super administrator level, administrator level and guest level.

Usage Guidelines

When using this command, note the following items:

Before running the command, ensure that the performance statistics of the system is
enabled.

4 System Management Commands

OceanStor S2600 Storage System

Command Reference

4-20

Huawei Proprietary and Confidential

Issue 07 (2010-05-20)

Summary of Contents for OceanStor S2600



















































































































































































































































































Search results

Summary of Contents for OceanStor S2600

Reviews:

Related manuals for OceanStor S2600

Brands by name

Popular brands

Huawei OceanStor S2600, Command Reference Manual

Search results

Summary of Contents for OceanStor S2600

Reviews:

Related manuals for OceanStor S2600

Brands by name

Popular brands