Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l
The command
showcache
is used to query the cache information about all controllers.
l
The command
showcache
-c
controller ID
is used to query the cache information about a
specified controller.
Example
Query the cache information.
OceanStor: admin> showcache
Controller A cache:
==========================================================
Cache Information
----------------------------------------------------------
Memory Capacity(MB) | 2048
Read Cache Utility(%) | 0
Write Cache Utility(%) | 0
Mirroring Write Cache Utility(%) | 0
Cache Hit Percentage(%) | 0
Whether there is dirty data | No
High Water Level(%) | 70
Low Water Level(%) | 20
==========================================================
Controller B cache:
==========================================================
Cache Information
----------------------------------------------------------
Memory Capacity(MB) | 2048
Read Cache Utility(%) | 0
Write Cache Utility(%) | 0
Mirroring Write Cache Utility(%) | 0
Cache Hit Percentage(%) | 0
Whether there is dirty data | No
High Water Level(%) | 70
Low Water Level(%) | 20
==========================================================
6.5.2 chgcache
Function
The command
chgcache
is used to set high and low water levels of the cache.
Format
chgcache
[
-h
high water position
] | [
-l
low water position
]
OceanStor S2600 Storage System
Command Reference
6 Service Management Commands
Issue 07 (2010-05-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-37
