Huawei OceanStor S2600 Command Reference Manual Download Page 93

Page: 93 / 274

Device Management Commands

About This Chapter

Device management commands are used to configure and query the device information of the
storage system.

5.1 Disk Enclosure Configuration Commands

Disk enclosure configuration commands are used to query the disk enclosure information ,
change the disk enclosure ID, and delete the disk enclosure.

5.2 Disk Management Commands

Disk management commands are used to manage disks.

5.3 Controller Management Commands

The controller management commands are used to manage the controller.

5.4 Hibernation Management Commands

Hibernation management commands are used to manage the hibernation of the components.

5.5 Command of Querying the Information About a Host Port Module

Command of querying the information about a host port module is used to query the information
about the host port module.

5.6 Expander Module Management Command

Expander module management command is used to manage the expander module.

5.7 UPS Information Query Commands

UPS information query commands are used to query the UPS information.

5.8 Command of Managing the Power Supply Information

Command of managing the power supply information is used to manage the information about
power supply.

5.9 Power off the device command

The command is used to power off the device.

5.10 BBU Information Query Command

BBU information query command is used to query the information about BBU.

5.11 Command of Querying the Fan Group Information

OceanStor S2600 Storage System
Command Reference

5 Device Management Commands

Issue 07 (2010-05-20)

Huawei Proprietary and Confidential

5-1

Summary of Contents for OceanStor S2600



















































































































































































































































































Search results

Summary of Contents for OceanStor S2600

Reviews:

Related manuals for OceanStor S2600

Brands by name

Popular brands

Huawei OceanStor S2600, Command Reference Manual

Search results

Summary of Contents for OceanStor S2600

Reviews:

Related manuals for OceanStor S2600

Brands by name

Popular brands