Huawei NetCol5000-A021 User Manual Download Page 168

Page: 168 / 234

NetCol5000-A021 In-row Air Cooled Smart Cooling
Product
User Manual (208 V)

6 System Operation and Maintenance

Issue 03 (2020-01-10)

160

Alarm
ID

Alarm Name

Alarm
Severity

Impact

Possible Causes

Solution

HP lock

the compressor
is shut down.
The alarm can
be manually
cleared.

alarm is generated
frequently.

alarm.

NOTE

After the alarm is rectified, click

Manual clear

on the alarm page.

a059

Suction
pressure sensor
fault

Major

The alarm is
generated.

The cables to
the press sensor
are loose or
damaged.

The press
sensor is faulty.

Check the cables to the
press sensor.

Replace the press sensor.

a060

Comp suction
LP

Major

The alarm is
generated, and
the compressor
is shut down.

The refrigerant
leaks.

The solenoid
valve is faulty.

The cables to
the press sensor
are loose or
damaged.

The press
displayed is
different from
the actual press.

The dryer filter
is blocked.

The expansion
valve is
blocked.

The indoor fans
are faulty.

Check for any leakages.
Fill refrigerant after
maintenance or
replacement.

Maintain or replace the
solenoid coil or the
solenoid valve.

Check the cables to the
press sensor.

Calibrate or replace the
press sensor.

Maintain or replace the
dryer filter.

Maintain or replace the
expansion valve.

Maintain or replace the
indoor fans.

a061

Comp suction
LP lock

Critical

The alarm is
generated, and
the compressor
is shut down.

The a060 comp
suction LP alarm is
generated
frequently.

Reference to the solutions for
the a060 comp suction LP
alarm.

NOTE

After the alarm is rectified, click

Manual clear

on the alarm page.

a062

Comp drive
alarm

Major

The alarm is
generated, and
the compressor
is shut down.

The comp
driver is faulty.

The comp is
faulty.

Maintain or replace the
comp driver.

Maintain or replace the
comp.

NOTE

After the alarm is rectified, click

Manual clear

on the alarm page.

a063

Comp drive
comm failed

Critical

The alarm is
generated, and
the compressor
is shut down
(the

The cables to
the comp driver
are loose or
damaged.

The comp

Check the cables to the
comp driver.

Maintain or replace the
comp driver.

Turn on the air switch of

Summary of Contents for NetCol5000-A021











































































































































































































































Search results

Summary of Contents for NetCol5000-A021

Reviews:

Related manuals for NetCol5000-A021

Brands by name

Popular brands

Huawei NetCol5000-A021, User Manual

Search results

Summary of Contents for NetCol5000-A021

Reviews:

Related manuals for NetCol5000-A021

Brands by name

Popular brands