manualshive.com logo in svg

Huawei IPC6125-WDL-FA, Configuration Manual

The Huawei IPC6125-WDL-FA is a cutting-edge security camera system. Ensure an effortless setup with the included Quick Start Manual. Gain a clear understanding of its features and functionalities by downloading the comprehensive user manual for free from our website.

Share
Download
background image

Parameter

Description

Shadow removed mode

Indicates the mode in which the shadow
is removed. The shadow generated when
objects are moving affects the detection
size. Set this parameter based on the site
requirements.

NOTE

– The parameter can be set to low, medium,

and high. You can set the parameter based
on the shadow strength.

– In a scenario with no shadow or small

shadows, 

Weak shadow

 is recommended

to ensure complete detection of objects.

– In a scenario with large shadows, 

Strong

shadow

 is recommended to cut objects

from shadows to make bounding
rectangles closer to the object sizes or cut
objects with shadows between to
separately display the objects.

Detection sensitivity

Indicates the sensitivity in which an
object can be detected.A higher
sensitivity indicates a higher
identification rate but also a higher false
alarm rate and more device performance
occupied.

NOTE

– The parameter can be set to low, medium,

and high. You can set the parameter based
on the site requirements.

– When there are many obstacles such as

lamplight and rustling leaves, 

Low

 is

recommended to prevent false alarms.

– When the foreground and background are

of the similar color, 

High

 is

recommended.

Background update rate

Indicates the speed of integrating an
object into the background. A large value
indicates quicker object integration.

NOTE

– The parameter can be set to low, medium,

and high. You can set the parameter based
on the site requirements.

– If the moving speed of an object is slow

and the background is clean, you are
advised to set this parameter to low.
Otherwise, the object may quickly
integrate the background, which is inferior
to foreground extraction.

– If the moving speed of an object is quick

and there is no external interference, you
are advised to set this parameter to high.

IPC6125-WDL-FA
Configuration Guide

9 Setting Intelligent Analysis Parameters

Issue 01 (2016-08-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

128

Summary of Contents for IPC6125-WDL-FA











































































































































































































Reviews:

No comments

Related manuals for IPC6125-WDL-FA

Hahnel Tuff TTL Instruction Manual preview
Tuff TTL
Brand: Hahnel Pages: 6
Digisol DG?SC3800P Quick Installation Manual preview
DG?SC3800P
Brand: Digisol Pages: 25
emmeti Topway Installation And Use Manual preview
Topway
Brand: emmeti Pages: 7
Hama 00176614 Operating Instructions Manual preview
00176614
Brand: Hama Pages: 17
G&D DVISplitter2-DL Installation Manual preview
DVISplitter2-DL
Brand: G&D Pages: 24
Braun NVR 400 User Manual preview
NVR 400
Brand: Braun Pages: 44
Q-See QSTC211 User Manual preview
QSTC211
Brand: Q-See Pages: 70
Dynascan DS491LT6 User Manual preview
DS491LT6
Brand: Dynascan Pages: 31
IP-Cam JW0004 User Manual preview
JW0004
Brand: IP-Cam Pages: 36
Bresser 9633110 Instruction Manual preview
9633110
Brand: Bresser Pages: 28
Zavio B5110 Quick Installation Manual preview
B5110
Brand: Zavio Pages: 13
KT&C KEZ-c1TR28V12XIR Quick Operation Manual preview
KEZ-c1TR28V12XIR
Brand: KT&C Pages: 18
IDS GigE uEye CP Rev. 2 Technical Manual preview
GigE uEye CP Rev. 2
Brand: IDS Pages: 23
Vosonic VP5500 User Manual preview
VP5500
Brand: Vosonic Pages: 31
EVERI Enrollment Kiosk Basic Maintenance preview
Enrollment Kiosk
Brand: EVERI Pages: 2
Smartparts SP56 User Manual preview
SP56
Brand: Smartparts Pages: 8
Pilot Electronics CL-3002WK Instructions Manual preview
CL-3002WK
Brand: Pilot Electronics Pages: 6
Nikon CoolPix 800 User Manual preview
CoolPix 800
Brand: Nikon Pages: 53

Brands by name

Popular brands

Load more brands