manualshive.com logo in svg

Huawei IPC6125-WDL-FA, Configuration Manual

The Huawei IPC6125-WDL-FA is a cutting-edge security camera system. Ensure an effortless setup with the included Quick Start Manual. Gain a clear understanding of its features and functionalities by downloading the comprehensive user manual for free from our website.

Share
Download
background image

9

 Setting Intelligent Analysis Parameters

About This Chapter

This section describes how to set behavior analysis parameters and video block detection of
intelligent analysis.

NOTE

The device does not support intelligent analysis during lens zooming.

9.1 Configuring the Intrusion Detection Function

The intrusion detection function checks whether an object enters a sensitive area (a key
surveillance area for which behavior analysis rules have been configured). The system
generates an alarm when an object enters a sensitive area.

9.2 Configuring the Loitering Detection Function

The loitering detection function checks whether an object loiters in a sensitive area for a time
period longer than a specified duration. The system generates an alarm when a loitering object
is detected.

9.3 Configuring the Abandoned Object Detection Function

The abandoned object detection function checks a sensitive area for objects that have been
abandoned for 5 seconds or longer. The system generates an alarm when an abandoned object
is detected.

9.4 Configuring the Removed Object Detection Function

The removed object detection function checks whether an object is removed from a sensitive
area. The system generates an alarm when an object is removed.

9.5 Configuring the Tripwire Detection Function

The tripwire detection function checks whether a person or an object crosses a specified
tripwire in a specified direction. The system generates an alarm when a person or an object
crosses the tripwire.

9.6 Configuring the Video Block Detection Function

You can configure video block detection function for the full screen. After the configuration,
an alarm will be generated when the camera lens is blocked.

IPC6125-WDL-FA
Configuration Guide

9 Setting Intelligent Analysis Parameters

Issue 01 (2016-08-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

101

Summary of Contents for IPC6125-WDL-FA











































































































































































































Reviews:

No comments

Related manuals for IPC6125-WDL-FA

D-Link DSC-350 - Digital Camera - 0.35 Megapixel Product Specification preview
DSC-350 - Digital Camera - 0.35 Megapixel
Brand: D-Link Pages: 2
D-Link DCS-932L Quick Install Manual preview
DCS-932L
Brand: D-Link Pages: 2
D-Link DCS-5020L Technical Support Setup Procedure preview
DCS-5020L
Brand: D-Link Pages: 5
D-Link DCS-5020L Manual preview
DCS-5020L
Brand: D-Link Pages: 67
D-Link DSC-100 Quick Install Manual preview
DSC-100
Brand: D-Link Pages: 8
D-Link DSC-350 - Digital Camera - 0.35 Megapixel Quick Start Manual preview
DSC-350 - Digital Camera - 0.35 Megapixel
Brand: D-Link Pages: 2
GE C1433 Manual Do Usuário preview
C1433
Brand: GE Pages: 81
Navitel MSR200 User Manual preview
MSR200
Brand: Navitel Pages: 15
Navitar 1-61445 Attachments preview
1-61445
Brand: Navitar Pages: 1
Baumer VLXT.FO Quick Start Manual preview
VLXT.FO
Brand: Baumer Pages: 2
Digisol DG-SC3610W Quick Installation Manual preview
DG-SC3610W
Brand: Digisol Pages: 18
ACME FlyCamOne Manual preview
FlyCamOne
Brand: ACME Pages: 4
Sammix FW08 User Manual preview
FW08
Brand: Sammix Pages: 7
Olympus 17mm 1:2.8 Instructions Manual preview
17mm 1:2.8
Brand: Olympus Pages: 66
Olympus M.Zuiko Digital ED 150-400mm F4.5 TC1.25x IS... Instructions Manual preview
M.Zuiko Digital ED 150-400mm F4.5 TC1.25x IS...
Brand: Olympus Pages: 202
LENCO DC-1041 Manual preview
DC-1041
Brand: LENCO Pages: 3
Delta DH-IPC-HFW1200SP-W User Manual preview
DH-IPC-HFW1200SP-W
Brand: Delta Pages: 6
RDI Technology CR6324 Instruction Manual preview
CR6324
Brand: RDI Technology Pages: 16

Brands by name

Popular brands

Load more brands