manualshive.com logo in svg

Huawei IPC6125-WDL-FA, Configuration Manual

The Huawei IPC6125-WDL-FA is a cutting-edge security camera system. Ensure an effortless setup with the included Quick Start Manual. Gain a clear understanding of its features and functionalities by downloading the comprehensive user manual for free from our website.

Share
Download
background image

Parameter

Description

Alarm check interval

Time interval at which the system checks
for new alarms. The system then reports
detected alarms to the surveillance platform.

NOTE

To prevent a flood of alarms, the system reports
only one alarm even if it detects multiple alarms
within the specified interval.

 

Step 4

Draw a sensitive area.
1.

Use the PTZ control panel to rotate the PTZ device to a target position.

2.

Click 

Draw

 and draw a sensitive area on the live video image.

3.

Specify the sensitive area name, and click 

Save

.

For detailed parameter description, see 

Table 9-2

.

Table 9-2

 Parameter description

Parameter

Description

Draw

Indicates the button for drawing a
sensitive area.

NOTE

– A sensitive area can be a triangle,

rectangle, or polygon.

– To redraw a sensitive area or tripwire that

is not saved, click 

Redraw

.

– A sensitive area supports a maximum of

10 vertexes.

– A maximum of four sensitive areas can be

configured for a type of behavior analysis.
A maximum of 10 sensitive areas can be
configured for all types of behavior
analysis.

– You can perform operations on a single

sensitive area at a time.

Delete

Indicates the button for deleting a
sensitive area.
To delete a sensitive area, select the
sensitive area or tripwire in the sensitive
area or tripwire list and click 

Delete

.

Enable/Stop

Indicates the button for enabling or
disabling a sensitive area or tripwire.
To enable or disable a sensitive area or
tripwire, select the sensitive area or
tripwire in the sensitive area or tripwire
list and click 

Enable

 or 

Stop

.

ID.

Indicates the ID of a sensitive area.

IPC6125-WDL-FA
Configuration Guide

9 Setting Intelligent Analysis Parameters

Issue 01 (2016-08-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

105

Summary of Contents for IPC6125-WDL-FA











































































































































































































Reviews:

No comments

Related manuals for IPC6125-WDL-FA

Canon A-1 Instructions Manual preview
A-1
Brand: Canon Pages: 90
D-Link DCS-1000 Product Information preview
DCS-1000
Brand: D-Link Pages: 2
Papago P3 Quick Start Manual preview
P3
Brand: Papago Pages: 82
NEO Smartpen M1+ User Manual preview
M1+
Brand: NEO Smartpen Pages: 12
Thinkware VHL3Z-19G490-C Installation Instructions preview
VHL3Z-19G490-C
Brand: Thinkware Pages: 4
PMD flexx2 Getting Started Manual preview
flexx2
Brand: PMD Pages: 8
ALIBI ALI-TP4028R Quick Installation Manual preview
ALI-TP4028R
Brand: ALIBI Pages: 5
BELL+HOWELL S16 Slim Instruction Manual preview
S16 Slim
Brand: BELL+HOWELL Pages: 3
FLIR ioi HD CF-5212 Quick Install Manual preview
ioi HD CF-5212
Brand: FLIR Pages: 2
Uniden Guardian App Cam 26 Quick Start Manual preview
Guardian App Cam 26
Brand: Uniden Pages: 9
Navman MiVue 358 Quick Start Manual preview
MiVue 358
Brand: Navman Pages: 8
IDEAL 61-844SW Software Instruction Manual preview
61-844SW
Brand: IDEAL Pages: 23
Kodak EASYSHARE P730m Extended User Manual preview
EASYSHARE P730m
Brand: Kodak Pages: 52
X10 DC10A User Manual preview
DC10A
Brand: X10 Pages: 9
Nextar N7-108 User Manual preview
N7-108
Brand: Nextar Pages: 32
Foscam FI8907W User Manual preview
FI8907W
Brand: Foscam Pages: 58
Kodak 8 MP - 8MP 3x Optical/5x Digital Zoom HD Camera Getting Started Manual preview
8 MP - 8MP 3x Optical/5x Digital Zoom HD Camera
Brand: Kodak Pages: 27
Samsung IWA User Manual preview
IWA
Brand: Samsung Pages: 19

Brands by name

Popular brands

Load more brands