3.
Click
Apply
. Then click
OK
in the
Are you sure to submit?
dialog box that is displayed
to complete the configuration.
Step 6
Save the configuration.
1.
Click
Save
on the upper right of the page to save the configuration.
shows the
parameter setting.
Figure 4-20
Saving the configuration
2.
Click
OK
in the
This will save current configuration, if you switch to other pages, you
will not get the operation result. Are you sure to save?
dialog box that is displayed to
complete the configuration.
----End
4.3 Configuration Example of DHCP Server
The locations and number of terminals in the network change frequently, so you need to use the
Dynamic Host Configuration Protocol (DHCP) to allocate dynamic IP addresses to the terminals.
The EGW2100 can serve as a DHCP server to offer IP addresses to the DHCP client.
Networking Requirements
A DHCP server dynamically assigns the IP addresses to a client in the same network segment.
The address pool segment 10.1.1.0/24 is divided into two segments: 10.1.1.0/25 and
10.1.1.128/25. The two network segments are in the Trust zone.
The IP addresses of the two Ethernet interfaces on the DHCP server are 10.1.1.1/25 and
10.1.1.129/25.
The IP lease of the segment 10.1.1.0/25 is 10 days and 12 hours, with domain name as
dhcpserver.com, DNS address as 10.1.1.2, egress device address as 10.1.1.126 and without the
NetBIOS address.
The IP lease of the segment 10.1.1.128/25 is 5 days, with DNS address as 10.1.1.2, egress device
address as 10.1.1.254, and NetBIOS address as 10.1.1.4.
Networking Diagram
shows the networking for configuring the DHCP server.
4 Configuration Example of the Internetworking
HUAWEI EGW2100
Web Configuration Guide
4-10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2010-02-20)
