manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 62

<Huawei> 

display user-interface tty 17

Idx  Type     Tx/Rx      Modem Privi ActualPrivi Auth  Int                    
  17   TTY 17   9600       -     0     -           N     2/0/0                  
  +    : Current UI is active.                                                  
  F    : Current UI is active and work in async mode.                           
  Idx  : Absolute index of UIs.                                                 
  Type : Type and relative index of UIs.                                        
  Privi: The privilege of UIs.                                                  
  ActualPrivi: The actual privilege of user-interface.                          
  Auth : The authentication mode of UIs.                                        
      A: Authenticate use AAA.                                                  
      N: Current UI need not authentication.                                    
      P: Authenticate use current UI's password.                                
  Int  : The physical location of UIs.            

4.5 Configuration Examples

This section provides examples for configuring console, TTY user interfaces, and VTY user
interfaces. These configuration examples explain networking requirements, configuration
roadmap, and configuration notes.

4.5.1 Example for Configuring Console User Interface

This part provides an example describing how to configure the console user interface. In this
configuration example, to allow a user in password authentication mode to log in to the router
by using a console user interface, multiple attributes of the console user interface are set,
including physical attributes, terminal attributes, user priority, user authentication mode, and
password.

Networking Requirements

To initialize configurations of the router or locally maintain the router, a user can log in to the
router through a console user interface. To allow the user to log in, you can set attributes of the
console user interface as needed (for security reasons, for example).

In the console user interface view, the password authentication mode is set (the password is

huawei

).

After a user logs in, if the user takes no action on the router for more than 30 minutes, the
connection between the user and the router is torn down.

Configuration Roadmap

The configuration roadmap is as follows:

1.

Enter the interface view and set physical attributes of the console user interface.

2.

Set terminal attributes of the console user interface.

3.

Set the user priority of the console user interface.

4.

Set the user authentication mode and password of the console user interface.

By default, the terminal service is enabled on all the user interfaces. If the terminal service is
disabled, run the shell command to enable the terminal service.

Data Preparation

To complete the configuration, you need the following data:

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

4 Configuring User Interface

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

51

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands