manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 198

Context

Before activating the GTL license, run the 

dir

 command to verify that the license file has been

loaded to the storage device (Flash memory, SD card, or USB flash drive).

Procedure

l

Run:

license active

 

file-name

The GTL license file is activated, and the license-controlled features on the device can be
used.

----End

9.3.9 Checking the Configuration

After the system software is upgraded, you can check information about interface parameters
and version consistency between resource files.

Prerequisite

The configurations of upgrading system software are complete.

Procedure

l

Run the 

display patch-information

 command to check information about all patches.

l

Run the 

display startup

 command to check that the values of the "Startup system software"

and "Startup saved-configuration file" fields in the command output are the needed ones.

----End

Example

After the patch is installed, run the 

display patch-information

 command. You can view the

patch status on each board.

<Huawei> 

display patch-information

Patch version    :    ARV200R001C00SPH100                                     
Patch packet name:    sd1:/patch_lic2.pat                                   

Run the 

display startup

 command. You can view the names of the system software and the

configuration file used at the startup. For example:

<Huawei> 

display startup

MainBoard:                                                                      
  Startup system software:                   sd1:/ar0215_31345_1220.cc          
  Next startup system software:              sd1:/ar0215_31345_1220.cc          
  Backup system software for next startup:   null                               
  Startup saved-configuration file:          sd1:/iascfg.zip                  
  Next startup saved-configuration file:     sd1:/iascfg.zip                  
  Startup license file:                      null          
  Next startup license file:                 null          
  Startup patch package:                     null              
  Next startup patch package:                null              
  Startup voice-files:                       null                               
  Next startup voice-files:                  null                               

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

9 Upgrade and Maintenance

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

187

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands