manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 60

user-interface

 

tty

 

interface-number

The TTY user interface view is displayed.

Step 3

Run:

user privilege

 

level

 

level

The priority of the user is set.

NOTE

l

By default, users logging in through the TTY user interface can use commands at level 3, and users
logging in through other user interfaces can use commands at level 0.

l

If the command level is inconsistent with the user level, the user level takes precedence.

----End

4.4.5 Configuring the Authentication Mode on a TTY User Interface

Context

By default, users are not authenticated on a TTY user interface.

Procedure

l

Configuring AAA authentication
1.

Run:

system-view

The system view is displayed.

2.

Run:

user-interface

 

tty

 

first-ui-number

 [ 

last-ui-number

 ]

The TTY user interface view is displayed.

3.

Run:

authentication-mode

 

aaa

The authentication mode is set to AAA authentication.

4.

Run:

quit

Exit the TTY user interface view.

5.

Run:

aaa

The AAA view is displayed.

6.

Run:

local-user

 

user-name

 

password

 { 

simple

 | 

cipher

 } 

password

The local user name and password are configured.

l

Configuring password authentication
1.

Run:

system-view

The system view is displayed.

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

4 Configuring User Interface

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

49

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands