Huawei AR2200 Series Configuration Manual Download Page 196

Page: 196 / 211

Run:

startup patch

file-name

A patch file to be used at the next startup is specified for the MPU.

Step 3

(Optional) Run:

startup saved-configuration

configuration-file

The configuration file to be used at the next startup is specified for the MPUs.

Step 4

(Optional) Run:

startup license

file-name

The license file to be used at the next startup is specified for the MPU.

----End

9.3.5 Configuring a Backup Startup File

After a backup startup software package is configured, the system can restart properly if a fault
occurs.

Context

If the storage device where the startup software package is stored is damaged, you can use the
backup software package to make the system start.

NOTE

The file name extension of the system software package must be .cc and the package must be stored
in the root directory.

The backup startup software package can be the same as or different from the current startup software
package, but it can be used to make the system start.

Procedure

Step 1

Run:

startup system-software

filename

backup

The backup startup software package is

specified.

----End

9.3.6 (Optional) Upgrading the BootROM of the LPU

After the system software is upgraded successfully, you need to manually upgrade the BootROM
of the 2FE and 1GEC.

Context

After the system software is upgraded successfully, you need to manually upgrade the BootROM
of the 2FE and 1GEC.

NOTE

Run the

display device

command to check whether the device is configured with the successfully registered

2FE or 1GEC.

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

9 Upgrade and Maintenance

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

185

Summary of Contents for AR2200 Series




















































































































































































































Search results

Summary of Contents for AR2200 Series

Reviews:

Brands by name

Popular brands

Huawei AR2200 Series, Configuration Manual

Search results

Summary of Contents for AR2200 Series

Reviews:

Brands by name

Popular brands