Huawei AR2200 Series Configuration Manual Download Page 190

Page: 190 / 211

Procedure

Activate the GTL license for the first time.

Run:

license active

file-name

The GTL license is activated and you obtained permission.

NOTE

If you use the GTL license for the first time, buy the GTL license file from Huawei.

Upgrade the GTL license.

Run:

license revoke

The GTL license invalidation code is returned.

NOTE

Apply to Huawei for a new GTL license by using the invalidation code.

Run:

license active

file-name

The GTL license is activated and you obtained permission.

----End

9.2.4 (Optional) Enabling the Emergency State of the GTL License
Module

Enabling the Emergency state of the GTL license module allows a device to use the maximum
specification of each feature or function.

Context

The Emergency state of a GTL license module can be enabled on the router in any of the
following situations:

The GTL license file of the Comm version has been activated and is in the Normal state.

The GTL license file of the Demo version has been activated and is in the Demo state.

The Emergency state can be enabled again only on the last day of the previous enabling
operation.

Procedure

Step 1

Run:

license emergency

The Emergency state of the GTL license module is enabled.

NOTE

After the Emergency state is enabled, note the following points:

The Emergency state cannot be cancelled manually.

The Emergency state can only be enabled three times, and can last seven days every time it is enabled.

The Emergency state can be enabled again only on the last day of the previous enabling operation.

----End

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

9 Upgrade and Maintenance

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

179

Summary of Contents for AR2200 Series




















































































































































































































Search results

Summary of Contents for AR2200 Series

Reviews:

Brands by name

Popular brands

Huawei AR2200 Series, Configuration Manual

Search results

Summary of Contents for AR2200 Series

Reviews:

Brands by name

Popular brands