manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 39

Context

You can use the display commands to collect information about the system status. The display
commands are classified according to the following functions:

l

Displays system configurations.

l

Displays the running status of the system.

l

Displays the diagnostic information about a system.

See the related sections for 

display

 commands for protocols and interfaces. The following part

only shows the system-level 

display

 commands. 

Run the following commands in any view.

3.2.1 Displaying System Configuration

This section describes how to check the system version, system time, original configuration, and
current configuration by using command lines.

Prerequisite

Basic configuration are complete.

Procedure

l

Run the 

display version

 command to display the system version.

l

Run the 

display clock

 command to display the system time.

l

Run the 

display saved-configuration

 command to display the original configuration.

l

Run the 

display current-configuration

 command to display the current configuration.

NOTE

l

The 

display version

 command can be used to display the software version of the system, the

chassis type, and the information about the main control board and interface board.

When a user runs the 

display current-configuration

 command to display configuration

information, other users cannot run the same command until all the command output is displayed.

l

The original configuration refers to information about configuration files used by the device when
the device has been powered on and is being initialized. The current configuration refers to the
configuration files taking effect during the device operation. For details, see the chapter
"Configuring System Startup" in the 

AR2200 Basic-Configuration

.

----End

3.2.2 Displaying System Status

This section describes how to check the system operating status (the configuration of the current
view) by using command lines.

Prerequisite

Basic configurations are complete.

Procedure

l

Run the 

display this

 command to display the configuration of the current view.

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

3 Basic Configuration

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

28

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands