manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 49

4.2.6 Checking the Configuration

After configuring the console user interface, you can view information about the user interface,
physical attributes and configurations of the user interface, local user list, and online users.

Prerequisite

The configurations of the user management function are complete.

Procedure

l

Run the 

display users

 [ 

all

 ] command to check information about the user interface.

l

Run the 

display user-interface

 

console

 

ui-number1

 [ 

summary

 ] command to check

physical attributes and configurations of the user interface.

l

Run the 

display local-user

 command to check the local user list.

----End

Example

Run the 

display users

 command, and you can view information about the current user interface.

<Huawei> 

display users

  User-Intf   Delay     Type   Network Address     AuthenStatus    AuthorcmdFlag
  0   CON 0   00:00:44                                   pass           no
Username : Unspecified

Run the 

display user-interface

 

console

 

ui-number1

 [ 

summary

 ] command, and you can view

the physical attributes and configurations of the user interface.

<Huawei> 

display user-interface console 0

  Idx  Type     Tx/Rx      Modem Privi ActualPrivi Auth  Int
  0    CON 0    9600       -     3     -           N     -  
  +    : Current UI is active.
  F    : Current UI is active and work in async mode. 
  Idx  : Absolute index of UIs. 
  Type : Type and relative index of UIs.
  Privi: The privilege of UIs.
  ActualPrivi: The actual privilege of user-interface.
  Auth : The authentication mode of UIs.
      A: Authenticate use AAA.
      N: Current UI need not authentication.
      P: Authenticate use current UI's password.
  Int  : The physical location of UIs.

Run the 

display local-user

 command, and you can view the local user list.

<Huawei> 

display local-user 

----------------------------------------------------------------------------  
  User-name                      State  AuthMask  AdminLevel                    
  ----------------------------------------------------------------------------  
  admin                          A      H         -                             
  ftp                            A      F         -                             
  guest                          A      A         15                            
  ----------------------------------------------------------------------------  
  Total 3 user(s)

4.3 Configuring VTY User Interface

If you need to log in to the router for local or remote maintenance by using Telnet or SSH, you
can configure the corresponding VTY user interface as needed.

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

4 Configuring User Interface

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

38

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands