manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 209

Step 4

Save the configuration file and restart the device.

# Save the configuration file.

<HuaWei> 

save

The current configuration will be written to the device.
Are you sure to continue? [Y/N]:

y

It will take several minutes to save configuration file, please wait...
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated 

# Restart the device.

<HuaWei> 

reboot

Info: The system is comparing the configuration, please wait.               
Warning: All the configuration will be saved to the next startup configuration.
Continue ? [y/n]:

y

  It will take several minutes to save configuration file, please wait........  
  Configuration file had been saved successfully                                
  Note: The configuration file will take effect after being activated
System will reboot! Continue ? [y/n]:

y

                                          

Info: system is rebooting ,please wait...   

Step 5

Verify the configuration.

After the device has been restarted, run the 

display version

 command. You can view that the

current system software is a new version. It means that the system software upgrade is successful.

<Huawei> 

system-view

[Huawei] 

sysname HuaWei

[HuaWei] 

display version

Huawei Versatile Routing Platform Software

VRP (R) software, Version 5.90 (AR2200 V200R001C00)

Copyright (C) 2000-2010 Huawei Technologies Co., LTD
Huawei AR2240 Router uptime is 0 week, 0 day, 3 hours, 59 minutes              
BKP 0 version information:                                                      
1. PCB      Version  : AR01BAK1A VER.C                                          
2. If Supporting PoE : Yes                                                      
3. Board    Type     : AR2240                                                   
4. MPU Slot Quantity : 1                                                        
5. LPU Slot Quantity : 2                                                        
                                                                                
MPU 0(Master) : uptime is 0 week, 0 day, 3 hours, 59 minutes                    
Flash Memory Size    : 16     M bytes
NVRAM Memory Size    : 512     K bytes 
SD Card1 Memory Size : 1887    M bytes 
MPU version information :                                                       
1. PCB      Version  : AR01SRU1A VER.A                                          
2. MAB      Version  : 0                                                        
3. Board    Type     : AR2240                                                 
4. CPLD1    Version  : 100                                                      
5. BootROM  Version  : -                                                        
                                                                                
LPU 1 : uptime is 0 week, 0 day, 3 hours, 53 minutes                            
SDRAM Memory Size    : 256     M bytes                                          
Flash Memory Size    : 64      M bytes                                          
LPU version information :                                                       
1. PCB      Version  : AR01SDCE2A VER.A                                         
2. MAB      Version  : 0                                                        
3. Board    Type     : 2T1/T1-
M                                                    
4. CPLD1    Version  : 0                                                        
5. CPLD2    Version  : 0                                                        
6. BootROM  Version  : 906                                                      
                                                                                
LPU 2 : uptime is 0 week, 0 day, 3 hours, 53 minutes                            
SDRAM Memory Size    : 256     M bytes                                          
Flash Memory Size    : 64      M bytes                                          
LPU version information :                                                       

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

9 Upgrade and Maintenance

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

198

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands