manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 47

4.2.4 Configuring User Priority of Console User Interface

This section describes how to control users' authority of logging in to the router and improve
the security of managing the router by configuring the user priority.

Context

l

Similar to command levels, users are classified into 16 levels numbered 0 to 15. The greater
the number, the higher the user level.

l

This process is to set the priority for a user who logs in through the console port. A user
can only use the commands with the level corresponding to the user level.

For details about command levels, see "

Command Level

" in the chapter "CLI Overview" of

the 

Configuration Guide - Basic Configuration

.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

user-interface

 

console

 

interface-number

The console user interface view is displayed.

Step 3

Run:

user privilege

 

level

 

level

The priority of the user is set.

NOTE

l

By default, users logging in through the console user interface can use commands at level 15, and users
logging in through other user interfaces can use commands at level 0.

l

If the command level is inconsistent with the user level, the user level takes precedence.

----End

4.2.5 Configuring the User Authentication Mode of the Console
User Interface

The system provides three authentication modes: AAA, password authentication, and non-
authentication. Configuring the user authentication mode can improve the security of the
router.

Context

By default, the user authentication mode of the console user interface is non-authentication.

Procedure

l

Configuring AAA Authentication
1.

Run:

system-view

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

4 Configuring User Interface

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

36

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands