77
78
LP-532 REV. 8.13.2014
LP-532 REV. 8.13.2014
Main components Replacement Instructions
1. Main Controller
1. Close the gas shut off valve
2. Turn the power off
3. Loosen two screws to remove main controller
cover.
4. Disconnect all the electrical connection to the main
controller
5. Loosen two screws on both sides to remove main
controller.
6. Assembly is in the reverse order as the part was
repaired.
7. Open the gas shut off valve
8. Turn the power on
9. Turn the unit on and ensure proper operation.
NOTE: When assemble connector, check wiring
color and proper connection to avoid mistake.
Chapter 5 Replacement instructions
Main components Replacement Instructions
2. Igniton Transformer
1. Close the gas shut off valve
2. Turn the power off
3. Disconnect the electrical connection to the main
controller
4. Remove the cable connected to the igniter.
5. Remove two screws to separate ignition trans
-
former from the water heater cabinet.
6. Separate ignition transformer from the bracket by
unlocking the palstic pieces on the back side of the
bracket.
7. Replace ignition transformer with new component
8. Assembly is in the reverse order as the part was
repaired.
9. Open the gas shut off valve
10. Turn the power on
11. Turn the unit on and ensure proper operation.
NOTE
Ensure the ignition transformer is properly secured.
Chapter 5 Replacement instructions
WARNING
Failure to turn the power off to the appliance before repair could result in serious injury or death.
WARNING
Failure to turn the power off to the appliance before repair could result in serious injury or death.
