High Technology, Inc.
109 Production Road,
Walpole MA USA 02081
Document Number
OM-E-FC-360-30
Revision Level
Rev. 3
Prepared By
J.S. Bolio
Approved By
S. Titov
Effective date
8/15/2016
Operator’s Manual: HTI BioChem FC-360
Page 100 of 217
HIGH TECHNOLOGY, INC. PROPRIETARY AND CONFIDENTIAL
Reagents in Use and Profiles
Figure 8-21
Within the
Methods
menu, select
Reagents in Use and Profiles
(Figure 8-16). Every time a method is
programmed, it will appear on the
In Use
listing.
Here is where the programmed methods should be se
t ‘in use’. The programmed methods can be:
Available:
They are seen in the column headed ‘
Available
’, and they will not appear in the selection
options (when adding a sample, calibrator or control, in the reagents tray)
In use:
They are seen in the column
headed ‘
In Use
’ and they will appear in the selection options (when
adding a sample, calibrator or control, in the reagents tray)
To change an
Available
method to
In Use
, select the chosen method from the
Available
list and press the
key:
To change an
In Use
method to
Available
, select the chosen method from the
In Use
list and press the
key:
After the change has been made, press the
OK
key.
In the
Profiles
column, groups of methods called
Profiles
can be created. (Figure 8-17)
Within the column, select the methods desired for the profile; enter a name in the field under this column
as shown in the example, and then press the
Add
and
OK
keys.
Note: If methods file is deleted, profiles will be shown anyway
