manualshive.com logo in svg

HTI BioChem FC-360, Operator'S Manual

The HTI BioChem FC-360 Operator's Manual is a comprehensive guide that enables users to fully understand and maximize the potential of this amazing product. It is available for free download at manualshive.com, providing users with convenient access to all the information they need to operate the HTI BioChem FC-360 efficiently and effectively.

Share
Download
background image

 

High Technology, Inc. 

109 Production Road,  
Walpole MA USA 02081 

Document Number 

OM-E-FC-360-30 

Revision Level 

Rev. 3 

Prepared By 

J.S. Bolio 

Approved By 

S. Titov 

Effective date 

8/15/2016 

Operator’s Manual: HTI BioChem FC-360 

 

IV                                                       

HIGH TECHNOLOGY, INC. PROPRIETARY AND CONFIDENTIAL

 

12.8.1.1  Photometer calibration ............................................................................................................... 145 
12.8.1.2  Cuvettes calibration .................................................................................................................... 146 

 

Diluter purge ................................................................................................................................... 146 

 

Washer purge ................................................................................................................................. 147 

 

Initialize .......................................................................................................................................... 147 

 

ISE (Optional) ................................................................................................................................. 147 

12.8.5.1  Start up ....................................................................................................................................... 148 
12.8.5.2  Calibrant A purge ....................................................................................................................... 149 
12.8.5.3  Calibrant B purge ....................................................................................................................... 149 
12.8.5.4  Calibration .................................................................................................................................. 149 
12.8.5.5  Clean .......................................................................................................................................... 150 
12.8.5.6  Pumps Calibration ...................................................................................................................... 150 
12.8.5.7  Bubble Sensor Calibration ......................................................................................................... 151 
12.8.5.8  Electrode replacement ............................................................................................................... 151 
12.8.5.9  Reagent Kit Replacement .......................................................................................................... 152 
12.8.5.10 

Reconnect .............................................................................................................................. 153 

13

 

ADVANCED OPERATIONS ...................................................................................................................... 153

 

 

CONFIGURATION OF THE PRINTING FORMATS .............................................................................. 153 

 

FILE EXCHANGE................................................................................................................................... 156 

 

IMPORTING SAMPLES FROM AN ADMINISTRATION PROGRAM ................................................... 156 

 

EXPORTING RESULTS TO THE ADMINISTRATION PROGRAM ...................................................... 157 

 

DETERMINATION OF PRECISION OF AN ANALYTIC METHOD ....................................................... 161 

 

DIRECT READING OF THE SOLUTION ABSORBANCE..................................................................... 161 

14

 

ISE MODULE: DESCRIPTION AND OPERATION (OPTIONAL) ............................................................ 163

 

 

ELECTRODES ....................................................................................................................................... 164 

 

FLUID MANAGEMENT .......................................................................................................................... 165 

 

SAMPLE TYPE ...................................................................................................................................... 165 

 

Sample Handling and Collection .................................................................................................... 166 

14.3.1.1  Serum ......................................................................................................................................... 166 
14.3.1.2  Plasma ....................................................................................................................................... 166 
14.3.1.3  Urine Samples ............................................................................................................................ 166 
14.3.1.4  Matrix Effects .............................................................................................................................. 166 

 

Reagent Kit Electronic Key ............................................................................................................ 167 

 

SAMPLE ASPIRATING AND DISPENSING .......................................................................................... 167 

 

CALIBRATION CYCLE .......................................................................................................................... 167 

 

CLEAN CYCLE ...................................................................................................................................... 169 

 

PURGE A CYCLE .................................................................................................................................. 169 

 

PURGE B CYCLE .................................................................................................................................. 169 

 

SIP CYCLE ............................................................................................................................................. 169 

 

OFF CYCLE (UNDER ELECTRODE REPLACEMENT COMMAND) ............................................... 169 

 

PUMP CALIBRATION CYCLE ........................................................................................................... 170 

 

BUBBLE CAL CYCLE ........................................................................................................................ 170 

 

MAINTENANCE ................................................................................................................................. 170 

 

Before starting daily operation ................................................................................................... 170 

 

Daily Maintenance ...................................................................................................................... 170 

 

Shutdown Procedure .................................................................................................................. 171 

 

ISE Module re-activation ............................................................................................................ 171 

 

ISE TROUBLESHOOTING ................................................................................................................ 171 

 

 

 

Summary of Contents for BioChem FC-360









































































































































































































































Reviews:

No comments

Related manuals for BioChem FC-360

DGH DGH 55B Operator'S Manual preview
DGH 55B
Brand: DGH Pages: 87
X-laser LASERCUBE Owner'S Manual And User'S Manual preview
LASERCUBE
Brand: X-laser Pages: 17
Dräger Alcotest 7000 Instructions For Use Manual preview
Alcotest 7000
Brand: Dräger Pages: 538
Balluff BML-S1G0-Q71 Series Condensed Manual preview
BML-S1G0-Q71 Series
Brand: Balluff Pages: 20
Omega FPDM1000 User Manual preview
FPDM1000
Brand: Omega Pages: 20
POSEIDON PVH2365 User Manual preview
PVH2365
Brand: POSEIDON Pages: 13
R&S FSH series Quick Start Manual preview
FSH series
Brand: R&S Pages: 130
Tektronix MTX100B Technical Reference preview
MTX100B
Brand: Tektronix Pages: 116
ICP DAS USA PM-3133-MTCP User Manual preview
PM-3133-MTCP
Brand: ICP DAS USA Pages: 71
CONDTROL xMarker User Manual preview
xMarker
Brand: CONDTROL Pages: 11
Milwaukee 2206-20 Repair Service Instructions preview
2206-20
Brand: Milwaukee Pages: 17
Hanna Instruments HI 9810 Instruction Manual preview
HI 9810
Brand: Hanna Instruments Pages: 11
ZIEHL TR660IP Operating Manual preview
TR660IP
Brand: ZIEHL Pages: 37
XPOtool 63039 Operation Manual preview
63039
Brand: XPOtool Pages: 6
Simex SPI-73 User Manual preview
SPI-73
Brand: Simex Pages: 48
Oakton 35631-00 Operating Instructions Manual preview
35631-00
Brand: Oakton Pages: 26
iDigit A570 Ambient Monitor Instruction Manual preview
A570 Ambient Monitor
Brand: iDigit Pages: 15
Triplett RHT32 User Manual preview
RHT32
Brand: Triplett Pages: 10

Brands by name

Popular brands

Load more brands