HTC ROSE100, User Manual

Page: 132 / 226

132 Getting Connected
3
.
In
Select network
, choose the WLAN network to connect to.
4.
In
Network type
, select
Internet
and click
Connect
.
Notes
•
When you select an open (unsecured) network, you will be automatically
connected to the network after clicking Connect .
•
If you are connecting to a security-enabled network, you will be asked to enter the
WEP Key . Enter the WEP Key and click Done .
You can check the Wi-Fi icon on the Title bar of the screen to see if you are
connected to the Wi-Fi network. To see the status icons, please see “Status
Indicators” in Chapter 1.
Note
In Comm Manager, click
Settings > WLAN Settings > Connection Status
to check
the current connection status and signal quality of each Wi-Fi channel.
To increase security on the Wi-Fi network
The LEAP (Lightweight Extensible Authentication Protocol) feature of Comm
Manager helps increase security on your phone, and ensures that nobody is able to
access your network without your permission.
1.
On the WLAN Settings screen, select
LEAP
.
2.
Click
Menu > New
.
3.
Enter the
SSID
(Service Set Identifier). You can obtain this information from
Orange.
4.
Enter the user name, password, and domain.
5. Select an Authentication Type .
By default, the
Authentication Type
for your phone is
Open System
authentication.
Notes •
By default, the LEAP screen displays data that you entered previously. However,
you can modify or delete the data as required by clicking Menu > Modify or Menu
> Delete
on the LEAP screen.
• For LEAP to work correctly, the receiving phone (your phone) must be set with the
same SSID, user name, and password as the access point.