![background image](http://html1.mh-extra.com/html/ht/eclipse-ht9025/eclipse-ht9025_user-manual_2178080031.webp)
ECLIPSE - HT9025
EN - 30
5.10. AC CURRENT MEASUREMENT
CAUTION
Make sure that all the test leads are disconnected from the meter terminals
for current measurement.
Fig. 32: Use of the instrument for AC current measurement
1. Select positions
60A
,
600A
or
1000A
2. Press the
MODE/VFD
key to select
“
A
”
measurement
3. Put the conductor to be tested inside to the center of clamp jaw (see Fig. 32) in order to
perform accurated measurements. Consider the notches on jaws as reference (see
Fig. 3)
4. The display shows the value of current.
5. If the display shows the message
“
OL
”
, the maximum measurable value has been
reached.
6. To use the HOLD function, see § 4.2
7. To use the internal functions, see § 4.3
8. To save the measured result, see § 4.3.4