![background image](http://html1.mh-extra.com/html/ht/eclipse-ht9025/eclipse-ht9025_user-manual_2178080029.webp)
ECLIPSE - HT9025
EN - 28
5.8. TEMPERATURE MEASUREMENT WITH K-TYPE PROBE
CAUTION
Before attempting any temperature measurement, cut off power supply from
the circuit to be measured and make sure that all capacitors are discharged,
if present.
Fig. 30: Use of the instrument for Temperature measurement
1. Select position
TypeK
.
2. Press the
MODE/VFD
key until the symbol
“
°C
”
or
“
°F
”
is displayed.
3. Insert the provided adapter into input terminals
VHz% CAP
:
(po) and
COM
(polarity -) (see Fig. 30).
4. Connect the provided K-type wire probe or the optional K-type thermocouple (see § 0)
to the instrument by means of the adapter, respecting the positive and negative polarity
on it. The display shows the value of temperature. The bargraph is not active in this
function.
5. The message
“
OL
”
indicates that the value of temperature exceeds the maximum
measurable value.
6. To use the HOLD and RANGE functions, see § 4.2
7. To use the internal functions, see § 4.3
8. To save the measured result, see § 4.3.4